2006 Jeep Wrangler Differential Carrier Parts

Choose your Engine for your 2006 Jeep Wrangler


Showing 1 - 10 of 10 products
Image
SKU
Product
Rating
Price

Spicer
  • DIFFERENTIAL CARRIER - LOADED; DANA 35; TRAC-LOK; 2.73 - 3.31
  • Case Split 3.31 And Down with Dana 35 Axle with Limited Slip Differential with Spider Gear
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Axle Shaft Spline Quantity: 27
    • Axle Model: Dana 35
    • Axle Spline Diameter (IN): 1.18
    • Bearings Included: Yes
    • Differential Case Split: 2.73 - 3.31
    • Vehicle Location: Rear
    • Cover Bolt Quantity: 10
    • Differential Type: Trac-lok
    • Carrier Type: Loaded
  • Features:
    • Designed to meet OE standards set by Dana, the global leader in drivetrain components.
    • Made in the USA for automotive applications.
    • Built from a stronger grade of steel than the nearest competitors.
    • Engineered to be stronger than ever.
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

This Part Fits the Following OEM/Substitute Numbers:
DS708138

Additional Fitment Information:
Vehicle Position
2006 - Jeep Wrangler Rear

Spicer
  • DIFFERENTIAL CARRIER - LOADED; DANA 35; TRAC-LOK; 2.73 - 3.31
  • with Spider Gear Case Split 3.31 And Down with Dana 35 Axle with Limited Slip Differential
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Axle Shaft Spline Quantity: 27
    • Axle Model: Dana 35
    • Axle Spline Diameter (IN): 1.18
    • Bearings Included: Yes
    • Differential Case Split: 2.73 - 3.31
    • Vehicle Location: Rear
    • Cover Bolt Quantity: 10
    • Differential Type: Trac-lok
    • Carrier Type: Loaded
  • Features:
    • Designed to meet OE standards set by Dana, the global leader in drivetrain components.
    • Made in the USA for automotive applications.
    • Built from a stronger grade of steel than the nearest competitors.
    • Engineered to be stronger than ever.
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.

Additional Fitment Information:
Vehicle Position
2006 - Jeep Wrangler Rear

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Front 4 Cyl 2.4L 148

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Rear 4 Cyl 2.4L 148

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Front 4 Cyl 2.4L 148

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Rear 4 Cyl 2.4L 148

Yukon Gear
  • Yukon standard open carrier case; AMC Model 35; 3.55/up
  • AMC 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall AMC Model 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall~Model 35; Bare Standard Open Carrier Case; 3.55 And Up Carrier Break (also 3.27 Ratio); 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall Deck Height
  • Model 35 3.55/up+3.27; standard Open case; BLT; 1.560in. side gear hub BORE; 1-5/8in. tall.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits AMC Model 35
    • Does Not Include Spider Gears
    • 3.54 Ratio And Up Only
    • Standard Open Carrier Case
    • 1.560 in. Side Gear Bore
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Rear 4 Cyl 2.4L 148

Yukon Gear
  • Yukon standard open carrier case; AMC Model 35; 3.55/up
  • AMC 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall AMC Model 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall~Model 35; Bare Standard Open Carrier Case; 3.55 And Up Carrier Break (also 3.27 Ratio); 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall Deck Height
  • Model 35 3.55/up+3.27; standard Open case; BLT; 1.560in. side gear hub BORE; 1-5/8in. tall.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits AMC Model 35
    • Does Not Include Spider Gears
    • 3.54 Ratio And Up Only
    • Standard Open Carrier Case
    • 1.560 in. Side Gear Bore
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Front 4 Cyl 2.4L 148

Yukon Gear
  • Yukon standard open carrier case; AMC Model 35; 3.55/up
  • AMC 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall AMC Model 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall~Model 35; Bare Standard Open Carrier Case; 3.55 And Up Carrier Break (also 3.27 Ratio); 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall Deck Height
  • Model 35 3.55/up+3.27; standard Open case; BLT; 1.560in. side gear hub BORE; 1-5/8in. tall.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits AMC Model 35
    • Does Not Include Spider Gears
    • 3.54 Ratio And Up Only
    • Standard Open Carrier Case
    • 1.560 in. Side Gear Bore
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Rear 4 Cyl 2.4L 148

Yukon Gear
  • Yukon standard open carrier case; AMC Model 35; 3.55/up
  • AMC 35; Rear; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall AMC Model 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall~Model 35; Bare Standard Open Carrier Case; 3.55 And Up Carrier Break (also 3.27 Ratio); 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall Deck Height
  • Model 35 3.55/up+3.27; standard Open case; BLT; 1.560in. side gear hub BORE; 1-5/8in. tall.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits AMC Model 35
    • Does Not Include Spider Gears
    • 3.54 Ratio And Up Only
    • Standard Open Carrier Case
    • 1.560 in. Side Gear Bore
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 - Jeep Wrangler L - Front 4 Cyl 2.4L 148
Showing 1 - 10 of 10 products

Loading...